• Document: OPERATION MANUAL OF MULTIHEAD WEIGHER
  • Size: 4.42 MB
  • Uploaded: 2019-07-11 17:27:03
  • Status: Successfully converted


Some snippets from your converted document:

OPERATION MANUAL OF MULTIHEAD WEIGHER Page 1 of 62 PREFACE Multihead weigher is automatic weighing equipment by using MCU control system to achieve high speed, accuracy and stable performance. Different function could be expanded according to customer’s requirements. To ensure proper use and safe operation, please refer this operation manual carefully before using. This manual contains most of the instruction that how to start machine and setup parameters. If any problem arises while using Multihead weigher machine, please feel free to contact our service department. We will try our best to provide you a professional service. NOTICE Working Environment:  Temperature: 0° - 45°C.  Humidity: 35% - 85% none condensing.  Keep away from the disturb source.  Installation place should on rigid, horizontal and no vibration surface.  Leave enough space around machine for maintenance. DO’s and DON’Ts  Only professional engineer is allowed to repair the machine when failure happens.  Turn off the main power while cleaning, moving or repairing the machine.  Avoid bumping or strong pressure on weigh hoppers.  The machine should be treated carefully while transporting, installation and disassembling. Prevent from strong vibration. Page 2 of 62 Chapter 1 Introduction Main components………………………………………………………..5 Working Theory………………………………………………………….7 Chapter 2 Connection Synchronizing with packaging machine……………………………….8 Chapter 3 Operation Startup Procedure………………………………………………………10 Page Configuration……………………………………………………..12 Home Menu……………………………………………………………..13 Program Copy…………………………………………………………..16 Automatic Run…………………………………………………………..19 Manual Test……………………………………………………………..25 Chapter 4 Weigher setup Program Setup………………………………………………………….28 Setup 1……………………………………………………………30 Setup 2……………………………………………………………33 Setup 3……………………………………………………………36 Setup 4……………………………………………………………38 Setup 5……………………………………………………………41 Calibration……………………………………………………………... 42 Summary……………………………………………………………….. 44 Page 3 of 62 Chapter 5 System Configuration System Setup……………………………………………………………46 Setup 1………………………………………………………….... 47 Setup 2…………………………………………………………… 49 Setup 3…………………………………………………………….51 Setup 4…………………………………………………………….52 Setup 5…………………………………………………………….53 About…………………………………………………………………….. 54 Password………………………………………………………………... 55 Chapter 6 Error Error Description…………………………………………………………57 Page 4 of 62 CHAPTER 1 INTRODUCTION This Chapter gives brief introduction of Multihead weigher machine. MAIN COMPONENTS Main Vibrator: Main vibrator is the vibrating source for the top cone, from top cone; product will be distributed to linear vibrator pan. Linear Vibrator: Linear vibrator is the vibrating source for the linear vibrator pan; product will be distributed to intermediate hopper (feed hopper). Page 5 of 62 Intermediate (Feed) Hopper: Intermediate (feed) hopper receives products from linear vibrator. It will discharge product to weigh hopper which is below it, when weigh hopper is empty. Weigh Hopper: Each weigh bucket is connecting to load cells and it will read weight of product inside the weigher, and controller will use the weighted data to make combination. Selected weigh hopper will discharge products to the collecting hopper or machine. Page 6 of 62 WORKING THEORY The product is fed to main vibrator pan than it is distributed to feed hopper by linear vibrator pan of each head. Each feed hopper will drop the product into weigh hopper as soon as it becomes empty. The weig

Recently converted files (publicly available):